12 mm original intake manifold for manual Puch X30 NS and NL mopeds and Puch Sprinter mopeds with Z50 engine.
The intake manifold has a continuous 12 mm bore and is therefore ideal for original cylinders with seal.
Hole spacing stud bolt: 38 mm
Total height: 70 mm
Total length: 48 mm
Ø carburetor connection (external): 20 mm
In contrast to cheap aftermarket products, both connection surfaces of this connecting piece are milled flat, which prevents false air from being drawn in.
Includes O-ring for a perfect seal between carburetor and intake manifold.
Good, inexpensive standard replacement part. GPO – GOOD PARTS ONLY.
Details
| Total length | 48.5 mm |
| Total height | 70 mm |
| Manufacturer | GPO |
| Material | Aluminum |
| Area of application | Original |
| Ø inside | 12 mm |
| Camouflaged | No |
| Mounting type | Screws |
| Number of fixing points | 2 pcs |
| Height flange center hole | 59 mm |
| Ø External connection | 20 mm |
| Hole spacing inlet | 38 mm |
Suitable for the following models
| Puch | Z50 (X30 Sport) |
Accessories & related products
swiing nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54 · Total length: 6 mm · Drive: Slot
18,60 EUR
BING O-ring Bing SRE & 85, Ø 20 mm
Place of use: Carburetor · Cord thickness: 1.4 mm · Color: black · Ø inside: 17.2 mm · Ø outside: 20 mm · Manufacturer: BING · Number of components: 1 pcs · Material: Rubber · Surface: raw · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM number: 0250 160 101
3,40 EUR
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Standard · Color: gray · Total length: 65 mm · Carburetor type: SRE · Width: 50 mm · Nominal diameter: 12 mm · Height: 108 mm · Camouflaged: No · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m
81,90 EUR
GPO intake manifold 15 mm round | Puch X30 NS, NL, Sprinter
Manufacturer: GPO · Camouflaged: No · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 70.3 mm · Height flange center hole: 60 mm · Total length: 48 mm · Area of application: Tuning
35,10 EUR
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
3,30 EUR
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Standard · Color: gray · Total length: 65 mm · Carburetor type: SRE · Width: 50 mm · Nominal diameter: 12 mm · Height: 108 mm · Camouflaged: No · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m
81,90 EUR
Collection only possible with online purchase and appointment.
