22 mm replica exhaust suitable for Puch Maxi S & N, Puch X30 Sport NS / NL, as well as Supermaxi LG1 / LG2 (if Puch Maxi cylinder is mounted) moped / moped.
The exhaust is a 2-piece, bolted, with corresponding Puch number.
The M7 bolt at the end of the flame tube must be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
We also recommend replacing the mounted gasket between the flame tube and the muffler. You can find a high-quality replacement product in the accessories section.
Attention: The sound of the replica exhausts can be slightly louder than the originals, which can be remedied by wrapping wool around the muffler. You will find this in the accessories section below.
Original Puch spare part number: 349.1.16.000.2
A quality product made in Portugal.
Details
| Ø outside | 58 mm |
| Color | Chrome |
| Total length | 920 mm |
| Manufacturer | Made in Portugal |
| Surface | chrome-plated |
| Material | Steel |
| Number of fixing points | 4 pcs |
| Mounting type | Welded lug, Stud bolts & nuts |
| Ø Flame tube outside | 22 mm |
| Exhaust type | Flute |
| Flame tube attachment | Flange |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (known as Nirosta®) · Nut type: Self-securing nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
0,80 EUR
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm
38,00 EUR
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
16,10 EUR
18,40 EUR
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Width: 125 mm · Height: 55 mm · Manufacturer: GPO · Number of fixing points: 4 pcs · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Area of application: Tuning · Decompressor: No · Camouflaged: Yes
49,50 EUR
- 10 %
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Total length: 66 mm · Height: 95 mm · Manufacturer: swiing · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Choke control: Hand choke · Mounting type: Plug connection clamped · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Width: 50 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
83,00 EUR
92,30 EUR
- 11 %
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø inside: 15 mm · Ø External connection: 20 mm · Total length: 46 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Camouflaged: Yes · Total height: 53 mm
35,70 EUR
40,30 EUR
Collection only possible with online purchase and appointment.
