Chromed EBR fork with reinforced bars.
For various mopeds. E.g. Zündapp Belmondo, Sachs 50/2 etc.
Block to attach the brake anchor plate is located on the right side.
With clamp for attaching the handlebars to the fork plate.
Internal diameter head tube (for stem mounting): 22 mm
Head tube length: 19.5 cm
Total length: 60 cm
Head tube thread: M26x1
Find matching headset bearings below in the accessories section.
Branded product from the Italian manufacturer EBR.
Details
| Manufacturer | EWC |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Adjustable | No |
| Thread type | MF26x1 (fine pitch thread) |
| Spar end distance (center-center) | 140 mm |
| Ø outer head tube | 26.1 mm |
| Ø spars | 28 mm |
| Ø head tube inside | 22 mm |
| Head tube length | 192 mm |
| Total length | 610 mm |
| Fork bridge - center wheel axle | 385 mm |
| Distance brake cam to wheel axle center-center | 82 mm |
| Thread length | 58 mm |
Suitable for the following models
| Sachs | |
| Zündapp Belmondo |
Accessories & related products
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Color: black · Surface: blank · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 2.6 mm · Ø outside: 4 mm · Total length: 12 mm · Width: 3.3 mm · Alternative version of the Pony Spare part no.: A4595A · Alternative version of Sachs spare part no.: Bing 47-032
7,80 EUR
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats SW: 7 mm · Ø outside: 8 mm · Thread length: 7 mm
2,80 EUR
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
Handlebar fork plate 30 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Surface: chrome-plated · Clamping diameter: 22 mm · Fork plate holder length: 90 mm · Width: 680 mm · Mounting type: Fork plate · Ø outside: 22 mm · Height: 270 mm · Length handlebar ends: 155 mm · Crossbar: Yes
37,00 EUR
Speedometer 60 km/h Ø 48 mm black / chrome
Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Color: Chrome · Color: black · Surface: chrome-plated · Color: red · Color: white · Thread type: MF10x1 (fine pitch thread) · Maximum speed: 60 Km/h · Lighting: Light slit · 4-edge speedometer cable: 2 mm · Ø Receptacle: 48 mm · Ø outside: 50.4 mm · Depth: 50 mm · Total height: 70 mm
67,50 EUR
Transval speedometer drive 17" with grease nipple
Place of use: left · Place of use: right · Thread type: MF10x1 (fine pitch thread) · Manufacturer: Transval · Material: Aluminum · 4-edge speedometer cable: 1.9 mm · Color: gray · Ø mounting hole: 11 mm · Overall width outside: 60 mm · Ø axle: 11 mm · Ø outside: 41 mm · Wheel size [inch]: 17 " · Total height: 52 mm
33,70 EUR
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø inside: 15 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C · Pony spare part no.: A1830 · Sachs spare part no.: 0250 090 000
6,10 EUR
Collection only possible with online purchase and appointment.
