Single, chrome-plated standpipe to fit the original fork of your Puch Maxi S / N moped.

This high-quality reproduction fork tube is characterized by top workmanship and accuracy of fit. The block for the brake anchor plate also has 2 M5 threaded holes for mounting the mudguard.

Ø fork leg: 23 mm
Block for brake anchor plate: 74x16/8x16 mm (LxWxH)
Total length: 49.5 cm
Wall thickness tube: 1.4 mm
Thickness wheel mount: 5.7 mm
Below block to below fork leg: 46 mm

Branded product from the Italian manufacturer EBR.

Details

Total length	495 mm
Manufacturer	EWC
Material	Steel
Surface	chrome-plated
Adjustable	No
Color	Chrome
Ø spars	23 mm
Distance brake cam to wheel axle center-center	40 mm
Thread type	M5x0.8 (standard thread)

Suitable for the following models

Puch

Moped fans like you also bought:

For: Puch

10029

swiing® revival cable guide mudguard black | Puch

Total length: 74 mm · Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Height: 12.5 mm · Mounting type: Plug connection · Number of fixing points: 2 pcs · Hole spacing: 63 mm

4,55 EUR

Not in stock

For: Puch

10077

GPO control bearing set M26x1 mm | Puch

Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Bearing type: Bearing ring · Thread type: MF26x1 (fine pitch thread) · Ø mounting frame: 31 mm · Ø inside: 26.8 mm · Ø outside: 41 mm

14,00 EUR

For: Puch

10081

GPO fork lock | Puch

Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Total length: 40.8 mm · Width: 17 mm · Ø outside: 12 mm · Ø rotating part: 12 mm · Ø Pin: 8 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Length of turned part: 25.6 mm · Locking block length: 15.3 mm

11,60 EUR

For: Puch

10085

Pedestal bearing shell | Puch

Total length: 70 mm · Width: 46 mm · Height: 20 mm · Material: Aluminum · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Number of fixing points: 3 pcs · Hole spacing: 41 mm · Mounting type: Screws

16,30 EUR

swiing® revival snap ring low control bearing set (version 2.0)

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10143

swiing® revival snap ring low control bearing set (version 2.0)

Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Height: 7 mm · Puch OEM number: 349.1.30.015.1 · Sachs OEM number: P0521

2,95 EUR

For: Puch

10217

Sliding bush fork original | Puch

Manufacturer: Made in Italy · Material: Plastic · Surface: raw · Color: white · Ø outside: 27 mm · Ø inside: 23 mm · Total length: 30 mm

3,75 EUR

swiing® revival bellows Ø 23/30 x 100 mm | Puch

For: Puch

10223

swiing® revival bellows Ø 23/30 x 100 mm | Puch

Manufacturer: swiing® revival parts · Material: Rubber · Color: black · Ø inside 2: 30 mm · Total length: 103 mm · Ø inside: 23 mm · Ø outside: 35 mm · Ø outside: 45 mm

23,30 EUR

swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH

For: Puch

10275

swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH

Ø Bundle: 24.1 mm · Manufacturer: swiing® revival parts · Total length: 19 mm · Material: Nylon · Surface: blank · Color: black · Bearing type: Plain bearing · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Puch OEM number: 349.1.42.005.1

2,95 EUR

For: Puch

17349

EBR spring insert fork (pair) | Puch

Manufacturer: EWC · Material: Spring steel · Surface: burnished · Color: brown · Ø outside: 19.5 mm · Ø inside: 13.5 mm · Ø wire: 3 mm · Total length: 185 mm · Thread type: M8x1.25 (standard thread)

49,10 EUR

For: Puch

24402

Bolt fork plate chrome | Puch

Thread length: 23 mm · Material: Steel · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Total length: 28.5 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 17 mm

4,55 EUR

Collection only possible with online purchase and appointment.

EBR fork leg (per piece) | Puch Maxi