Hot 
Tuning clutch for Puch Maxi S / N, Puch Supermaxi LG1 mopeds / mopeds which have an E50 input engine installed.
The racing clutch is equipped with a reinforcement plate, which provides the necessary stability at high speeds.
The scope of delivery includes four different spring strengths for the corresponding application range:
- Red (installed springs with thin wire): correspond to original clutch springs
- Blue: Slightly tuned engines (approx. 1000-1500 rpm higher speed when engaging the clutch)
- Yellow: Medium tuned engines (approx. 3000-3500 rpm higher speed when engaging the clutch)
- Red: High-end tuning (approx. 4500-6500 rpm higher speed when engaging)
Before installing the centrifugal clutch, make sure that the openings of the retaining rings (BZ rings) are facing outwards.
This prevents the BZ rings from loosening during operation.
Branded product from the manufacturer DMP.
Details
| Thickness | 22 mm |
| Manufacturer | DMP |
| Area of application | Performance, Racing, High End, Tuning |
| Material addition | Chrome steel (stainless steel) |
| Number of springs | 3 pcs |
| Material | Steel |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Ø outside | 94 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Thickness: 0.5 mm · Number of components: 1 pcs · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
3,35 EUR
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
11,50 EUR
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Drive: External hexagon · Alternative version of the Puch OEM number: 360.1.10.034.1
8,65 EUR
Hot
swiing 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing · Width: 50 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
93,10 EUR
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Drive: Cross recess · Drive: Hexagon socket · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
11,50 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of components: 1 pcs · Thickness: 1 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
Collection only possible with online purchase and appointment.
