Disc brake system manufactured in small series incl. sandblasted 16” front wheel and CNC-milled brake caliper plate for your Piaggio Si moped / moped.
The aluminum milled base plate is mounted to the mounting points of the mudguard using the two screws supplied. The existing cam on the fork gives the bracket additional guidance and ensures stability. All relevant bolts are either fitted with lock nuts or already secured with medium-strength Loctite.
Contents of the disc brake set:
Installation instructions:
After fitting a tire, routing the cable and installing the new grip unit, the brake fluid reservoir must be filled and the system bled.
If you want to continue using the mudguard, the brake calliper plate still needs to be adjusted.
If you want to continue using the speedometer, the speedometer drive must be drilled out and the spacer turned off.
Use only fresh DOT4 brake fluid and bleed the system properly to ensure your safety.
Pay attention to cleanliness during assembly and clean the brake disk and brake shoes before commissioning.
General information:
The use on reproduction forks (e.g. from EBR) has not been tested by us.
This is a used, refurbished and newly powder-coated rim, which may have small imperfections.
You will find the complete disc brake system for the rear wheel along with threadlocker and brake fluid in the accessories section.
A quality product made in Italy.
Details
Manufacturer | Made in Italy |
Material | Aluminum, Steel |
Surface | powder-coated |
Color | black |
Ø outside | 220 mm |
Cable length | 900 mm |
Suitable for the following models
Piaggio | Si |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
24,70 EUR
2 470,00 EUR/l
Continental 2.00 - 2.50 x 16" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 " · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Valve type: TR6 car valve
16,20 EUR
Heidenau 2.25 x 16" tires M4 Allround
Manufacturer: Heidenau · Tire width [inch]: 2.25 " · Color: black · Wheel size [inch]: 16 " · Old designation: 20 x 2.25 · Speed index: J = 100 km/h · Load capacity index: 38 = 132 kg · Profile type: M4 · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
48,40 EUR
Continental Go 2.25 x 16" Semi-Slick
Manufacturer: Continental · Tire width [inch]: 2.25 " · Tire width [mm]: 57.15 · Wheel size [inch]: 16 " · Old designation: 20 x 2.25 · Speed index: J = 100 km/h · Load capacity index: 38 = 132 kg · Profile type: ContiGo! · Tire type: Semi-slick · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose) · Color: black
58,50 EUR
Motorex brake fluid DOT4 250 ml
Manufacturer: Motorex · DOT class (brake fluid): DOT 4 (230°C) · Contents [ml]: 250 ml · Hazard warning: Can harm the child in the womb · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health · Area of application: Standard
9,80 EUR
39,20 EUR/l
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Material: Rubber · Material: Steel · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm · Mounting type: Screws · Thread type: MF10x1.25 (fine pitch thread) · Color: black
26,90 EUR
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Ø outside: 5 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
2,25 EUR
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Area of application: Standard
3,85 EUR
IMCA shock absorber 28 cm black
Manufacturer: IMCA · Material: Steel · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø spars: 28 mm · Ø outside: 45 mm · Total length: 280 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Color: black
57,40 EUR
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: Union nut
14,00 EUR