High-quality deco cable (inner cable) suitable for various mopeds, mopeds and small motorcycles.
This starter cable was also used on bikes such as Puch, Puch Maxi, Sachs, Hercules, Pony, Zündapp, etc..
Ø decolitz: 1.5 mm
Cable length: 1.8 m (= 180 cm)
Ø nipple: 3 / 5 mm
Nipple length: 7 mm
A quality product made in Germany.
Details
| Ø Stranded wire | 1.5 mm |
| Ø nipple | 3.3 mm, 5 mm |
| Nipple length | 7 mm |
| Manufacturer | Made in Germany |
| Material | Steel |
| Area of application | Standard |
| Surface | blue galvanized |
| Nipple shape | Pears |
| Cable length | 1800 mm |
| Pony spare part no. | P0919 |
Suitable for the following models
| Universal | |
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | |
| Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Ø outside: 5 mm · Screw head: Lens head · Drive: Slot · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
2,25 EUR
swiing® revival washer slotted decompressor cable Inox | Puch Maxi S / N
Ø inside: 3.8 mm · Ø outside: 12 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Original · Area of application: Standard · Nominal diameter (thread): 3 mm · Thickness: 1.4 mm · Puch spare part no.: 349.1.67.005.1
4,40 EUR
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
16,60 EUR
83,00 EUR/l
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
3,15 EUR
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
2,70 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Ø outside: 5 mm · Screw head: Lens head · Drive: Slot · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
2,25 EUR
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Brass · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2000 mm
3,85 EUR
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2250 mm · Piaggio spare part no.: 270460
2,70 EUR
Collection only possible with online purchase and appointment.
