Used cylinder cover with 38 mm combustion chamber diameter suitable for the Puch Ur-Maxi S and Ur-Maxi N moped / moped.
An original cylinder head from the CH model with small cooling fins, which is cooled by ambient air (airstream). This head has an M10x1 thread for mounting a decompressor.
Dimension (L x W x H): 13.5 x 12.5 x 5.5 cm
Thread decompressor valve: MF 10 x 1 mm
Used spare part which is in technically serviceable condition, signs of use are to be expected. The cylinder head is sandblasted, the sealing surface should be briefly ground flat for safety reasons.
You can find the matching decompressor valve in the accessories section.
Original Puch spare part number: 349.2.10.401.1
Details
| Manufacturer | Puch |
| Material | Aluminum |
| Area of application | Original |
| Surface | sandblasted |
| Ø cylinder | 38 mm |
| Total length | 135 mm |
| Width | 125 mm |
| Height | 55 mm |
| Number of fixing points | 4 pcs |
| Decompressor | MF10x1 |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
37,10 EUR
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Number of components: 4 pcs
8,35 EUR
swiing® revival 38 mm tuning cylinder CH12 | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 50 ccm · Camouflaged: Yes · Nominal diameter: 38 mm · Number of fixing points: 4 pcs · Outlet type: straight · Alternative version of the Puch spare part no.: 349.7.10.105.0
112,60 EUR
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Diameter: 7 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Drive: External hexagon · Width across flats SW: 10 mm · Thread length: 15 mm · Thread length: 19 mm · Strength class: 10 · Strength class: 10.9 · Alternative version of the Puch spare part no.: 360.1.10.034.1
22,30 EUR
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
11,20 EUR
24,89 EUR/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Drive: External hexagon · Width across flats SW: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
8,35 EUR
GPO screw set for engine mounting, galvanized | Puch
Storage method: Sack · Manufacturer: GPO · Material: Steel · Area of application: Standard · Surface: blue galvanized · Color: silver · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 13 mm · Thread length: 23.5 mm · Shank: Yes · Strength class: 8.8 · Dimension storage box: 100 x 90 x 10 · Number of components: 12 pcs
10,00 EUR
Athena 38 mm cylinder kit 50 cc camouflaged | Puch
Manufacturer: Athena · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Ø cylinder neck: 47.7 mm · Ø outlet inside: 24.4 mm · Inlet window: 22 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm
174,60 EUR
swiing® revival nozzle holder 2.20 Bing SRE & SRA
Manufacturer: swiing® revival parts · Material: Brass · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Drive: External hexagon · Ø nozzle holder: 2.2 mm · Total length: 29.5 mm · Nozzle thread: M3.5 · Nozzle block: 2.20
9,35 EUR
Collection only possible with online purchase and appointment.
