Universal G 5x10 mm fork head, which is used, for example, for the use of a foot brake / rod brake or as a plate holder on your moped, moped and small motorcycle.
Practical, elegant component that makes every custom conversion look professional. The thread allows you to position the fork head exactly where you want it.
Total length: 25 mm
Thread: M5
Ø Bore: 5 mm
Width: 10 mm
Insert length: 20 mm
Material: Steel
Surface: blue galvanized, passivated
Alternative sizes and corresponding threaded rods can be found under accessories.
Details
Thread type | M5x0.8 (standard thread) |
Material | Steel |
Surface | blue galvanized |
Height | 25 mm |
Accessories & related products
Threaded rod M5 galvanized 50 cm
Material: Steel · Surface: blue galvanized · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 500 mm · Strength class: 4.8
4,15 EUR
Cap nut M5 brass
Material: Brass · Surface: blank · Nut type: Cap nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
2,05 EUR
66HEROES Set cap nut with washer and threaded rod M4 - M10 brass / steel
Manufacturer: 66HEROES · Material: Brass · Material: Steel · Surface: blank · Surface: blue galvanized · Nut type: Cap nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Ø inside: 4.3 mm · Ø inside: 5.3 mm · Ø inside: 6.4 mm · Ø inside: 8.4 mm · Ø inside: 10.5 mm · Ø outside: 9 mm · Ø outside: 10 mm · Ø outside: 12 mm · Ø outside: 16 mm · Ø outside: 20 mm · Height: 8 mm · Height: 10 mm · Height: 12 mm · Height: 15 mm · Height: 18 mm · Thread depth: 5.5 mm · Thread depth: 7.5 mm · Thread depth: 8 mm · Thread depth: 11 mm · Thread depth: 13 mm · Width across flats SW: 7 mm · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm
25,50 EUR
Moped fans like you also bought:
swiing® revival screw set Motor Inox | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Standard · Surface: blank · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Puch spare part no.: 900.1216 · Puch spare part no.: 900.1308
22,40 EUR
Oil seal FPM 17/40/7 DUO VITON | Puch E50
Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 40 mm · Manufacturer: Puch · Material: FPM - Rubber · Area of application: Standard · Surface: rubberized · Width: 7 mm · Temperature resistance (min.): -30 - 200 °C
11,20 EUR