Socket axle M11x200 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels (shortened) and rear wheels.
The complete rear axle set is also equipped with the following parts:
- 2 pcs M11 x 1 nuts (SW17 / 10 mm)
- 2 pcs spacer washer (Ø 20 x 2 mm)
- 2 pcs;ck bearing cone (D19 x d13 mm / SW15)
- 3 pcs M11 x 1 nuts (SW17 / 4 mm)
- 2 pcs ball set à 8 balls (Ø 6.32 mm)
Other threaded shafts and individual parts of this set can be found in the accessories section.
Made by the Italian brand CIF.
Details
| Manufacturer | CIF |
| Ball bearing closed | No |
| Material | Steel |
| Surface | blue galvanized |
| Ø shaft | 10.3 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Total length | 200 mm |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Thread length | 92 mm |
| Height | 10 mm, 4 mm, 2 mm |
| Shank length | 14.5 mm |
| Width across flats SW | 17 mm, 15 mm |
Suitable for the following models
| Puch | |
| Sachs |
Accessories & related products
Wheel axle set M12x1 x 165 mm front
Width: 7 mm · Height: 9.9 mm · Width: 10.2 mm · Width: 32 mm · Total length: 165 mm · Width across flats SW: 19 mm · Manufacturer: Quenching · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Shank length: 114 mm · Thread length: 25 mm · Thread length: 26 mm
16,60 EUR
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,70 EUR
2 470,00 EUR/l
swiing® revival set wheel bearing M11x1
Diameter: 17.95 mm · Thread type: MF11x1 (fine pitch thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Ø inside: 25.85 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats SW: 15 mm · Ø outside: 29 mm · Height: 10.6 mm · Height: 14.15 mm
49,90 EUR
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,20 EUR
24,89 EUR/l
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Valve type: TR4 Auto valve · Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5
11,20 EUR
Bearing cone M11x1 mm
Height: 12 mm · Width across flats SW: 15 mm · Ø outside: 19 mm · Material: Steel · Surface: gas nitrided · Color: graphite colors · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
8,90 EUR
Collection only possible with online purchase and appointment.
