Cable duct made of dark gray plastic for Puch Maxi S, N and Supermaxi LG1, LG2 mopeds / mopeds.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. Throttle and clutch cables are pulled through the side openings of the cable cover.
Further cable guides in various colors can be found in the accessories section.
Details
| Total length | 320 mm |
| Width | 58 mm |
| Material | Plastic |
| Ø mounting hole | 5.3 mm |
| Color | gray |
| Height | 22 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
14,90 EUR
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 48 mm · Total length: 63 mm
17,30 EUR
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Material: Rubber · Surface: blank · Color: black · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Total length: 12 mm · Width: 3.3 mm · Ø outside: 2.6 mm · Ø outside: 4 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
7,95 EUR
Not so nice 
15 mm intake manifold | Puch E50
Camouflaged: Yes · Material: Aluminum · Ø inside: 14.5 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 54 mm · Height flange center hole: 43 mm · Total length: 47 mm · Area of application: Tuning
13,90 EUR
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Standard
38,00 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Color: black
23,00 EUR
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Test mark: none · Tension: 6 V · Ø Receptacle: 4 mm · Material: Plastic · Color: black · Color: red · Bulb holder: BA15s · Width: 60 mm · Depth: 80 mm · Height: 110 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
42,20 EUR
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Thread length: 22 mm · Shank: No · Strength class: 8.8 · Number of components: 24 pcs · Color: silver
9,10 EUR
Collection only possible with online purchase and appointment.
