High-quality Ø 14 mm rod axle made of yellow galvanized steel incl. retaining rings to fit your Piaggio Si moped / moped.
When this fine piece of galvanized iron in the form of a rod bolt was placed on our product manager's desk, he was filled with somersaults and leaps of joy, followed by emotional tears of joy. The neatly chamfered ends allow for easy assembly and the length of the axle is perfectly tailored to the frame's rod mount. As there are now only two points for the circlip assembly, he was finally able to fit the silencer on the first attempt without colliding with the exhaust.
Details
| Manufacturer | Buzzetti |
| Material | Steel |
| Surface | galvanized (yellow) |
| Mounting type | Circlip |
| Total length | 101 mm |
| Thickness | 14 mm |
| Number of fixing points | 2 pcs |
| Piaggio OEM number | 214490 |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
29,20 EUR
Main stand original | Piaggio SI Mix
Manufacturer: Piaggio · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 210 mm · Wide receptacle (C): 85.7 mm · Ø Receptacle (D): 13.5 mm · Wide upright foot (F): 20 mm · Total height: 265 mm · Piaggio OEM number: 185869
44,40 EUR
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,35 EUR
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Cable length: 2000 mm · Area of application: Standard · Number of components: 1 pcs · Nipple length: 5.5 mm
4,00 EUR
Air filter 2 PS (DGM) original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Plastic · Color: black · Mounting type: Plug connection clamped · Filter type: Grille · Width: 94 mm · Ø outside: 51 mm · Total length: 26.5 mm · Ø Internal connection: 49.7 mm · Height: 89 mm · Area of application: Original · Area of application: Tuning
18,60 EUR
swiing® revival locking plate nut Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: blank · Number of lobes: 1 pcs · Ø outside: 33.5 mm · Ø inside: 8.15 mm · Area of application: Original · Area of application: Standard
4,00 EUR
Dell'Orto 12/7 SHA carburetor hand choke | Piaggio Ciao C24
Manufacturer: Dell'Orto · Material: Aluminum · Color: black · Mounting type: Plug connection clamped · Carburetor type: SHA (type 3) · Width: 60 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Nominal diameter: 7 mm · Nominal diameter: 12 mm · Ø Internal connection: 16 mm · Total length: 45 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 36 · Ø Inside entrance: 7 mm · Height: 112 mm · Area of application: Original · Area of application: Standard · Ø Output inside: 12 mm · Ø Air filter connection: 50.8 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Camouflaged: No
81,90 EUR
Deco cable Ø 1.2 mm x 200 cm | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2000 mm · Number of components: 1 pcs · Nipple length: 5.5 mm
4,00 EUR
Collection only possible with online purchase and appointment.
