Dichtung
Sort:Popularity
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Ø inside: 27.4 mm · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Place of use: Exhaust · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
8,35 EUR
swiing® ingenious gasket outlet (18 - 22 mm) graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Standard · Reinforced: No · Thickness: 3.4 mm · Ø outlet inside: 22.7 mm · Place of use: Exhaust · Hole spacing outlet: 37.5 - 42.5 mm · Ø screw holder: 7.3 mm
7,80 EUR
Athena gasket outlet 21 mm graphite
Total length: 54 mm · Manufacturer: Athena · Ø inside: 21.1 mm · Ø outside: 34.3 mm · Material: Graphite / Graphite · Thickness: 1.6 mm · Place of use: Exhaust · Place of use: Outlet · Number of fixing points: 2 pcs · Hole spacing: 40 mm · Temperature resistance (min.): 3000 °C · Ø mounting hole: 6.3 mm
5,50 EUR
Precisely fitting exhaust gaskets for your Puch moped for optimum exhaust gas routing
An exhaust that does not seal tightly at the transition between the engine and manifold of your moped exhaust can have several disadvantages. On the one hand, your scooter is often significantly louder in this case if the seal to the silencer or moped exhaust does not seal correctly. On the other hand, the exhaust gas routing suffers from a leaking exhaust seal. Optimum back pressure is not built up from the exhaust system to the engine. This can lead to a loss of power. You should therefore replace a defective or even missing exhaust gasket on the exhaust with a high-quality spare part as quickly as possible. You can find the right exhaust gasket for your Puch Maxi moped as well as gaskets for all other moped models from the Austrian manufacturer in our range - a perfect fit, top quality and at a fair price.
Replace the exhaust gasket on your Puch-Maxi and seal the exhaust reliably
Fitting an exhaust gasket is not that difficult. On a Puch Maxi moped and most other motorbikes, the manifold is attached to the exhaust with just 2 screws. To be able to fit the gasket, you must first loosen these screws and then remove the exhaust system. Make sure that you also loosen the other fixing points of the exhaust so that you have enough play to fit the exhaust gasket between the manifold and the exhaust. Before you do this, however, you should first thoroughly clean the contact surface for the exhaust gasket. You can then fit the exhaust gasket to your Puch Maxi moped and then tighten all the bolts and nuts to secure the exhaust system.
High-quality seals for your moped exhaust on the Puch moped
In our range, you will find custom-fit exhaust gaskets for your Puch X30, Maxi or Supermaxi moped. All sealing materials for your exhaust system available in our shop are high-quality spare parts in first-class OEM quality, which are perfectly matched to your model. So you can always be sure that the exhaust gasket you order for your Puch moped will actually fit, seal perfectly and last a long time.
Order exhaust gasket for all motorbikes from Puch's model range online now at mofakult
If you need a new exhaust gasket for your Puch Maxi or X30 moped, simply order it conveniently, safely and at a fair price from our online shop. And of course, in addition to the exhaust gasket, you can also find all other relevant parts for the exhaust system of your moped here, even a complete new exhaust for your Puch moped on request. Sealing compund and other exhaust parts are usually available directly from stock within a few days, allowing you to carry out upcoming repairs without a long wait. Do you have a question about your order? Then simply give us a call or send us an e-mail. We will be happy to advise you.
Collection only possible with online purchase and appointment.
