Auspufftopf
Sort:Popularity
Exhaust 22 mm original 2-piece | Puch Maxi S, N
Manufacturer: Puch · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Flange · Ø Flame tube outside: 22 mm · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 6 pcs
174,60 EUR
GPO exhaust flute Ø 28 / 60 mm original | Sachs 50/2, 503
Manufacturer: GPO · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 560 mm · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Ø outside: 20 mm · Mounting type: Screwed clamp · Exhaust type: Flute · Flame tube attachment: Plug connection clamped
112,60 EUR
Set
Hot 
swiing® ingenious silencer counter-cone set | Puch
Total length: 210 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Surface: raw · Color: graphite colors · Color: red · Ø inside: 14.3 mm · Ø outside: 54.5 mm · Alternative version of the Puch spare part no.: 349.1.16.011.0
101,30 EUR
Not in stock
swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust) camouflaged | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Total length: 730 mm
157,70 EUR
Exhaust Boss Demper Ø 28 / 60 mm chrome
Color: Chrome · Material: Steel · Surface: chrome-plated · Total length: 580 mm · Ø outside: 60 mm · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Plug connection clamped
112,60 EUR
Hot
swiing® ingenious flute Ø 32 / 70 mm chrome (reso exhaust)
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 25 mm · Ø Silencer: 70 mm · Ø Internal connection: 32 mm · Exhaust type: Flute · Mounting type: Screwed clamp · Total length: 785 mm · Flame tube attachment: Plug connection clamped
123,90 EUR
Exhaust Boss Demper Ø 28 / 60 mm with lug chrome | Puch
Color: Chrome · Material: Steel · Surface: chrome-plated · Total length: 580 mm · Ø outside: 60 mm · Ø Silencer: 60 mm · Number of fixing points: 1 pcs · Ø Internal connection: 28 mm · Mounting type: Welded lug · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Plug connection clamped
112,60 EUR
Rear muffler flute Ø 28 / 70 mm chrome
Manufacturer: Made in Portugal · Color: Chrome · Material: Steel · Surface: chrome-plated · Total length: 700 mm · Ø outside: 70 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Flute · Flame tube attachment: Plug connection clamped
66,40 EUR
Jamarcol muffler flute Ø 32 / 70 mm chrome
Manufacturer: Jamarcol · Color: Chrome · Material: Steel · Surface: chrome-plated · Total length: 790 mm · Ø outside: 70 mm · Ø Internal connection: 32 mm · Mounting type: Screwed clamp · Exhaust type: Flute · Flame tube attachment: Plug connection clamped
95,70 EUR
Exhaust Boss Demper Ø 28 / 60 mm black
Material: Steel · Color: black · Surface: varnished · Total length: 580 mm · Ø outside: 60 mm · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Plug connection clamped
112,60 EUR
Jamarcol muffler cigar Ø 28 / 70 mm chrome | Kreidler
Manufacturer: Jamarcol · Color: Chrome · Material: Steel · Surface: chrome-plated · Total length: 700 mm · Ø outside: 70 mm · Number of fixing points: 2 pcs · Ø Internal connection: 28 mm · Mounting type: Screws · Exhaust type: Cigar · Flame tube attachment: Plug connection clamped
56,20 EUR
Exhaust 19 mm replica without catalytic converter | Puch Supermaxi LG1/LG2
Total length: 900 mm · Number of fixing points: 3 pcs · Material: Steel · Surface: varnished · Color: black · Ø Internal connection: 15.5 mm · Mounting type: Nuts · Ø Flame tube outside: 19 mm · Puch spare part no.: SM512/23 (344 V) · Puch spare part no.: SM513/23 (344 V) · Alternative version of the Puch spare part no.: SM514/30 (344 VK) · Alternative version of the Puch spare part no.: SM515/30 (344 VK)
292,50 EUR
Hot
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Color: gray · Surface: raw · Surface: varnished · Ø Silencer: 50 mm · Ø outside: 88 mm · Mounting type: Tab · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Total length: 900 mm · Flame tube attachment: Stud bolts & nuts
321,10 EUR
Not in stock
Page 1 of 3
Your new exhaust silencer for your Puch-Maxi, Velux X30 or NG-2AH moped
The exhaust silencer on your moped not only serves to reduce the noise emissions of your Puch Maxi, Sport X30 or X30 NG-2AH moped to a level that is tolerable for others. In addition, it is responsible for optimally dissipating the exhaust gases from the combustion of the fuel-air mixture. In this way, it contributes to maximum power output. Of course, this is especially the case if you opt for a tuning exhaust system including silencer. With us, you will not only find original silencers as spare parts for your Puch Maxi or Velux moped. We also have a wide selection of exhaust tuning parts and flame pipes for Austrian mopeds from renowned manufacturers such as Tecno, Homoet or Proma, always including a matching exhaust clamp, of course.
Replacing the silencer on your Puch moped
As the entire exhaust is attached with just a few screws, it is not difficult for beginners to replace it if necessary. This may be necessary, for example, if the original silencer is corroded due to its age and rust has already eaten holes in it. However, a suitable exhaust is also essential for a harmonious tuning setup on your moped. Because you can only get the maximum performance out of your Hödi if all the tuning parts are perfectly matched. However, this is generally not possible with an original exhaust.
From the original silencer to high-performance tuning exhausts
For your moped, such as the beautiful Puch X30 or the legendary Puch Maxi moped, we offer you original silencers and always the right tuning silencer from well-known brands such as GPO, Jamarcol, MLM and 66Heroes. Of course, you can also buy a silencer from our own brand swiing, including a matching exhaust clamp. Every exhaust silencer available from us for Puch mopeds such as the Puch-Maxi-Töffli, the Monza-Hobel or the X30-Perle is optimally matched to the respective model, so that an excellent fit is guaranteed. This makes installation simple and easy. The same applies to every exhaust clamp that you order from us to match your new silencer. This means you can easily replace the entire exhaust system on your moped.
Order your high-quality exhaust silencer for all Puch models online at mofakult now
Is your Puch maxi pearl getting on in years and needs a new exhaust system? Whether you opt for an original muffler for your maxi moped or would prefer to install a tuning muffler on your X-30 slicer for more power, you'll find what you're looking for here. In our online shop, you can get first-class branded goods including matching exhaust clamps at a fair price, allowing you to repair or upgrade the performance of your moped for little money. From exhaust silencers for Puch models to many other tuning parts for your moped, almost all the products we offer are available directly from stock. We are happy to support you if you have any questions about a specific part or need advice. Simply send us an e-mail or give us a call.
Collection only possible with online purchase and appointment.
