H.905 brake caliper for various front and rear wheels on Sachs and Hercules mopeds, mopeds with automatic engines.
The workmanship is good and the brake plate fulfills its purpose without any problems. Only a little copper grease on the brake cam and a slightly thicker washer to reduce the play would be beneficial.
Suitable add-on parts such as brake pads, the aforementioned grease and a suitable adjusting screw can be found in the accessories section.
Details
| Material | Steel |
| Surface | galvanized (blue) |
| Ø axle | 10 mm |
| Ø drum | 90 mm |
| Ø outside | 107 mm |
| Wide cam holder | 10 mm |
| Cranking (offset) | 15 mm |
| Ø bore | 12.2 mm |
| Brake lever length (lever length) | 65 mm |
Suitable for the following models
| Sachs | |
| Hercules |
Accessories & related products
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs
2,70 EUR
Eurol copper grease 100 g
Manufacturer: Eurol · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Temperature resistance (min.): -40 - 1100 °C · Contents [g]: 100 g · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Area of application: Fat
13,40 EUR
134,00 EUR/kg
Magura set screw M6x34 mm lock nut SW10
Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 10 mm · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Slotted: No · Ø Receptacle: 7.05 mm · Total length: 34 mm · Thread length: 23 mm
2,80 EUR
Stop nut M6 Inox
Material: Chrome steel (stainless steel) · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nut type: Self-securing nut · Drive: External hexagon
0,80 EUR
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats SW: 7 mm · Ø outside: 8 mm · Thread length: 7 mm
2,80 EUR
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: galvanized (blue) · Color: silver · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Total length: 175 mm · Number of fixing points: 1 pcs
11,20 EUR
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs
2,70 EUR
Magura set screw M6x34 mm lock nut SW10
Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 10 mm · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Slotted: No · Ø Receptacle: 7.05 mm · Total length: 34 mm · Thread length: 23 mm
2,80 EUR
Collection only possible with online purchase and appointment.
