Fuel hose connection suitable for Bing carburetors of the SRE, Bing 85, SRC, SRF, SLH, SRA series.
Was installed on Sachs 503, Puch Maxi S / N, Puch X30 NS/NL, Puch X30 Velux, Kreidler, etc.
Height: 7.3 mm
Hole diameter: 8.1 / 8.9 mm
Original BING spare part manufactured in Germany in original equipment quality.
NOS – New from old stock.
Details
| Manufacturer | BING |
| Material | Aluminum |
| Carburetor type | SRE, 85, SRC, SRF, SLH, SRA (1/11/35) Velux, SRA (1/11/31) Velux |
| Height | 7.3 mm |
| Ø outside | 6 mm |
| Ø inside | 8.1 mm, 8.9 mm |
| Mounting type | Screws |
| Pony spare part no. | A2056 |
| Sachs spare part no. | 0261 125 000 |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
| Kreidler | Flory MF |
Accessories & related products
BING Sealing ring fuel inlet Bing SRE, 85, SRC, SRF, SLH, SRA
Ø inside: 8.3 mm · Manufacturer: BING · Area of application: Standard · Material: Fiber · Surface: raw · Place of use: Carburetor · Ø outside: 11.7 mm · Thickness: 1.1 mm · Pony spare part no.: A4553 · Sachs spare part no.: 0962 013 000
1,60 EUR
Moped fans like you also bought:
swiing® revival start slide Bing SRE
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Carburetor type: SRE · Total length: 23.5 mm · Width: 16 mm · Height: 12.5 mm · Choke control: Hand choke · Alternative version of the Pony Spare part no.: A4599 · Alternative version of Sachs spare part no.: 0962 089 000
5,05 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Ø inside: 41 mm · Material: Sealing paper · Surface: blank · Ø outside: 45 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony spare part no.: A4519 · Sachs spare part no.: 0950 128 000
3,15 EUR
BING Sealing ring fuel inlet Bing SRE, 85, SRC, SRF, SLH, SRA
Ø inside: 8.3 mm · Manufacturer: BING · Area of application: Standard · Material: Fiber · Surface: raw · Place of use: Carburetor · Ø outside: 11.7 mm · Thickness: 1.1 mm · Pony spare part no.: A4553 · Sachs spare part no.: 0962 013 000
1,60 EUR
swiing® revival screw fuel inlet Bing SRE, 85, SRC, SRF, SLH, SRA
Manufacturer: swiing® revival parts · Drive: External hexagon · Thread length: 13 mm · Screw head: Hexagon · Shank: Yes · Thread type: M8x0.75 (fine pitch thread) · Alternative version of the Pony Spare part no.: A4656 · Alternative version of Sachs spare part no.: 2640 009 000
10,00 EUR
BING float needle with groove SRE, SRC, SRF, SRA, 85, 18 NOS
Manufacturer: BING · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Height: 12 mm · Ø outside: 4 mm · Pony spare part no.: A4595A · Sachs spare part no.: Bing 47-032
16,80 EUR
swiing® revival spring Throttle stand screw Bing SRE, SRA, 85
Spring design: Pressure spring · Ø inside: 5.5 mm · Manufacturer: swiing® revival parts · Carburetor type: SLH · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Total length: 10 mm · Carburetor type: 85 · Pony spare part no.: A4554 · Sachs spare part no.: 0962 040 000
2,15 EUR
Collection only possible with online purchase and appointment.
