Special pipe bend suitable for Bing SRA (Puch X30 Velux) and Bing SSE (ILO / JLO) carburettors.
The throttle cable guide pipe has an M6 x 0.75 mm mounting thread.
Other carburettor bends and throttle cables can be found in the accessories section.
Original BING spare part manufactured in Germany in original equipment quality.
NOS – New from old stock.
Details
| Manufacturer | BING |
| Total length | 23.5 mm |
| Material | Brass, Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | nickel-plated |
| Angle | 68 ° |
| Carburetor type | SRA (1/11/35) Velux, SRA (1/11/31) Velux, SSE |
| Height | 28 mm |
| Ø outside | 14.35 mm, 11.95 mm, 6 mm |
| Internal thread | M5x0.8 (standard thread) |
| Thread type | MF6x0.75 (fine pitch thread) |
Suitable for the following models
| Puch | |
| Zündapp Belmondo | |
| ILO / JLO |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Surface: galvanized (blue) · Cable length: 2200 mm
3,25 EUR
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 90 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 43 mm · Total length: 52 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 27 mm · Width across flats nut: 7 mm
13,90 EUR
GPO 70° carburetor pipe bend M6x0.75
Manufacturer: GPO · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 70 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 35 mm · Total length: 41.5 mm · Internal thread: M5x0.8 (standard thread) · Height: 36 mm · Height: 37 mm · Width across flats nut: 8 mm
5,70 EUR
43° cable pull pipe bend
Manufacturer: Made in Germany · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 43 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Ø outside: 10 mm · Total length: 63.5 mm · Total length: 72.5 mm · Height: 26 mm
9,20 EUR
90° carburetor pipe bend M6x0.75 Dell'Orto SHA original | Piaggio Ciao
Manufacturer: Piaggio · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 90 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 27.5 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 30 mm
5,70 EUR
Nut carburetor pipe bend Dell'Orto SHA carburetor original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF6x0.75 (fine pitch thread) · Drive: External hexagon · Height: 3 mm · Width across flats SW: 8 mm
2,80 EUR
BING pipe bend adapter Bing SRA / SSE NOS
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SSE · Ø outside: 12 mm · Ø outside: 14 mm · Total length: 7 mm
10,00 EUR
Moped fans like you also bought:
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Surface: blank · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,25 EUR
Collection only possible with online purchase and appointment.
