Sticker set for the tank and frame of your Puch Maxi S moped / moped.
The sticker set contains the two lettering «PUCH» as well as the decorative stickers for the tank and rear frame section.
These are UV and petrol-resistant decals with gold print on transparent PVC film.
Dimension «PUCH» lettering: 118x21 mm
Total tank sticker dimensions: 325x54 mm
Total frame sticker dimensions: 224x60 mm
Durability: UV-resistant, petrol-resistant
Surface: glossy
Color: golden / transparent
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive.
Suitable cleaning cloths and other tank adhesives and frame adhesives can be found in the accessories
.
Details
Material | Polyvinyl chloride (PVC-U_hard) |
Color | gold |
Place of use | Frame (+ tank) |
Rear side texture | Adhesive |
Consistency | UV-resistant, petrol resistant |
Suitable for the following models
Puch |
Accessories & related products
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC-U_hard) · Place of use: Frame (+ tank) · Color: black · Color: white · Rear side texture: Adhesive · Width: 123 mm · Width: 230 mm · Width: 330 mm · Consistency: UV-resistant · Consistency: petrol resistant · Height: 26 mm · Height: 60 mm · Height: 65 mm
10,60 EUR
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Screw head: Hexagon · Total length: 15 mm · Width across flats SW: 7 mm · Thread length: 7 mm · Ø Bundle: 6 mm · Area of application: Standard
2,80 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,20 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,25 EUR
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
11,20 EUR
Cable set E50 engine automatic black | Puch Maxi S / N
Material: Steel · Quantity: 4 pcs · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
22,00 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut · Puch spare part no.: 349.3.22.030.0 · Puch spare part no.: 349.4.22.030.0
11,20 EUR
swiing® revival wiring harness MERIT light switch (version 2.0)
Cable cross-section [mm²]: 1.5 mm² · Manufacturer: swiing® revival parts · Ø Receptacle: 22 mm · Number of cables: 5 pcs · Cable bifurcation to motor: 950 mm · Switch included: Yes · Luster terminal: Yes · Cable bifurcation to lamp: 230 mm · Cable bifurcation to switch: 400 mm · Tail light cable length: 1000 mm · Area of application: Standard
45,00 EUR