ADDY clutch disk (inner plate) suitable for your manual moped / moped with Sachs 503 2AL / 2BL engine.
The clutch plate is suitable for the ADDY 4-plate racing clutch. The paper-based clutch lining is the first of three stages and corresponds to the classic lining. No wear on the steel plates, but rather soft clutch behavior.
The clutch facings are manufactured in an environmentally friendly manner and are made from environmentally friendly materials.
Facing thickness: 3.5 mm
Price per piece - you need 4 pieces for the clutch.
Alternative clutch linings, the complete clutch package and other add-on parts can be found under accessories.
Quality product from the ADDY by Schöb Engineering brand.
Details
Manufacturer | ADDY |
Area of application | Tuning |
Material | Paper |
Recording type | Interlocking |
Ø inside | 63.5 mm, 68.5 mm |
Ø outside | 94 mm |
Number of slats | 4 pcs |
Thickness | 3.5 mm |
Suitable for the following models
Sachs | 503 - 2AL / 2BL |
Accessories & related products
3-plate clutch | Sachs 503, 50/2 (502), 50/3, 50/4
Ø inside: 29.6 mm · Ø inside: 35.3 mm · Ø outside: 110.5 mm · Manufacturer: Made in Europe · Material: Composite materials · Material: Steel · Area of application: Tuning · Number of springs: 9 pcs · Recording type: Interlocking · Number of slats: 3 pcs · Thickness: 3.8 mm
471,00 EUR
540,90 EUR
ADDY clutch plate (4-plate clutch) red cork-rubber (stage 2) | Sachs 503
Manufacturer: ADDY · Material: Cork · Material: Rubber · Recording type: Interlocking · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Ø outside: 94 mm · Number of slats: 4 pcs · Thickness: 3.5 mm · Area of application: Tuning
11,20 EUR
ADDY clutch plate (4-plate clutch) green sintered technology (stage 3) | Sachs 503
Manufacturer: ADDY · Material: Composite materials · Recording type: Interlocking · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Ø outside: 94 mm · Number of slats: 4 pcs · Thickness: 3.5 mm · Area of application: Tuning
12,90 EUR
Moped fans like you also bought:
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Width: 130 mm · Total length: 200 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
6,10 EUR
Magura cable clamp Ø 7 x 9 mm
Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Total length: 9 mm · Total length: 14.5 mm · Area of application: Standard · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Number of components: 1 pcs · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Thread length: 6 mm · Screw head: Countersunk head · Screw head: Hexagon · Width across flats SW: 6 mm · Ø outside: 7 mm
2,80 EUR