Interchangeable number holder for your moped, moped and small motorcycle.
Everyone who owns more than one moped and doesn't ride around on two at the same time like Jean-Claude Van Damme should get this practical interchangeable number holder.
This means that the same number can be changed from one moped to the next in a matter of seconds. This saves time and money.
The number holder system impresses with its sophisticated yet simple functionality.
The spring plate is either attached directly to the license plate frame with the two M4 cams and the M4x12 mm countersunk screws.
The black anodized aluminium block with the corresponding recesses is mounted directly on the moped frame.
With light pressure and a little momentum, the number is easily pushed into the locking position. This is bombproof - even in snow, rain and strong winds.
Scope of delivery as shown in figure 1. You can find more parts for the number holder system in the accessories.
Figures 3 & 4 illustrate the mounted number holder.
This table gives you an overview of how many mopeds can be mounted on a license plate in the relevant cantons of Switzerland and Liechtenstein.
| Aargau | 19 |
| Appenzell A.-Rh. | 1 |
| Appenzell I.-Rh. | 5 |
| Basel-Landschaft | 99 |
| Basel-City | 99 |
| Bern | unlimited |
| Freiburg | unlimited |
| Genève | 2 |
| Glarus | 1 |
| Graubünden | unlimited |
| Jura | unlimited |
| Liechtenstein | 2 |
| Lucerne | 99 |
| Neuchâtel | 2 |
| Nidwalden | 30 |
| Obwalden | 30 |
| Schaffhausen | 50 |
| Schwyz | unlimited |
| Solothurn | unlimited |
| St. Gallen | unlimited |
| Ticino | unlimited |
| Thurgau | unlimited |
| Uri | 1 |
| Waadt | 2 |
| Wallis | unlimited |
| Zug | 19 |
| Zürich | 19 |
Excellent quality from the premium custom brand 66HEROES.
The following video explains the details and installation of the replacement number holder in detail:
Details
| Manufacturer | 66HEROES |
| Material | Chrome steel (stainless steel) |
| Ø mounting hole | 4.5 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Thread length | 12 mm |
| Thread type | M4x0.7 (standard thread) |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo |
| Cilo | |
| DKW | |
| Fantic | |
| Garelli | |
| Honda | |
| Hercules | |
| ILO / JLO | |
| Kreidler | |
| Malaguti | |
| MBK | |
| Miele | |
| Motobecane | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp | |
| Franco Morini |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,70 EUR
2 470,00 EUR/l
Hot 
66HEROES Custom number frame "mofakult" black (CH version)
Manufacturer: 66HEROES · Hole spacing: 50 mm · Material: Aluminum · Surface: anodized · Color: black · Mounting type: Nuts & bolts · Width: 111 mm · Thread type: M4x0.7 (standard thread) · Height: 153 mm · Total length: 7 mm · Number of fixing points: 2 pcs
56,20 EUR
66HEROES Custom chrome number frame (CH version)
Manufacturer: 66HEROES · Hole spacing: 50 mm · Material: Aluminum · Color: Chrome · Surface: chrome-plated · Mounting type: Nuts & bolts · Width: 111 mm · Thread type: M4x0.7 (standard thread) · Height: 7.5 mm · Total length: 153 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5.2 mm
56,20 EUR
67,50 EUR
66HEROES interchangeable number holder set
Manufacturer: 66HEROES · Material: Aluminum · Material: Spring steel · Surface: brushed · Surface: electropolished · Color: black · Thread type: M5x0.8 (standard thread) · Mounting type: Bayonet lock · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
33,70 EUR
Not in stock
Moped fans like you also bought:
Moderate Casual 
Main stand black | Puch Maxi S, P1 / X30 NS, NL, NG
Total height: 220 mm · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm
22,40 EUR
GPO chain tensioner | Puch Maxi S
Thread type: M6x1 (standard thread) · Manufacturer: GPO · Total length: 175 mm · Material: Plastic · Material: Steel · Surface: blue galvanized · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Color: black · Color: silver · Number of fixing points: 1 pcs
11,20 EUR
swiing® revival side protection screw set black | Puch Maxi S
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Color: silver · Total length: 47 mm · Total length: 60 mm
14,50 EUR
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,70 EUR
2 470,00 EUR/l
Collection only possible with online purchase and appointment.
