38 mm reproduction cylinder kit for Puch Supermaxi LG1 / LG2 mopeds. This cylinder also fits Puch Maxi or Puch X30 mopeds, as it is equipped with smaller exhaust ports. In this case, however, the corresponding exhaust with a narrower outlet must be fitted.
The tuning cylinder has a larger inlet and outlet. Therefore, the cylinder has slightly more intake than the original counterpart.
The piston has two piston rings.
You can find suitable add-on parts in the accessories section.
Attention: The stud bolt distance on the intake side is only 32 mm. On the original cylinder, this is 38 mm. The holes on the intake manifold must therefore be widened slightly in order to be able to fit it.
Details
Camouflaged | No |
Material | Gray cast iron |
Surface | sandblasted |
Displacement | 50 ccm |
Crankshaft stroke | 43 mm |
Nominal diameter | 38 mm |
Ø piston pin (B) | 12 mm |
Hole pattern [mm] | 44 x 44 |
Thread inlet | M6x1 (standard thread) |
Number of fixing points | 4 pcs |
Area of application | Tuning |
Outlet type | slanted |
Hole spacing outlet | 42 mm |
Thread outlet | M6x1 (standard thread) |
Hole spacing inlet | 32 mm |
Suitable for the following models
Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm · Area of application: Standard
8,55 EUR
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Width: 14.2 mm · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
13,70 EUR
Moped fans like you also bought:
NSK E20 shoulder ball bearing
Bearing cage: Brass cage ball-guided · Inner ring width: 12 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Material: Brass · Surface: blank · Stock number: E20 · Bearing type: Deep groove ball bearing · Ø inside: 20 mm · Ø outside: 47 mm · Ball bearing closed: No · Width: 12 mm
28,70 EUR
NSK L17 shoulder ball bearing
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Material: Brass · Material: Steel · Surface: blank / oiled · Stock number: L17 · Bearing type: Shoulder bearing · Ø inside: 17 mm · Ø outside: 40 mm · Ball bearing closed: No · Width: 10 mm · Area of application: Standard
22,50 EUR
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Ø inside: 17 mm · Ø outside: 35 mm · Temperature resistance (min.): -30 - 100 °C · Width: 7 mm
9,10 EUR